WLAN Pi R4 BYOP Kit

£140.00

Bring Your Own Pi Kit

Please note this is a kit that includes everything you need to assemble your own WLAN Pi R4 excluding the Raspberry Pi 4 and SD card.

WLAN Pi R4 Assembly Guide

What is included

  • Panda Wireless PAU0F AXE3000 Wi-Fi 6E USB Adapter

    • Up angle / 90 degree USB adapter

  • Waveshare LCD display & buttons HAT (pre-threaded with Joystick cap attachment)

  • Waveshare Lightweight Aluminium Alloy Case

  • 3D printed PETG

    • Fascia

    • Internal Support

    • Vanity Plate

    • (Waveshare UI board) Shim

  • 3D Printed Rubberised

    • Button pads

  • Joystick cap v2

  • 1x Brass threaded insert (spare Joystick cap attachment)

  • 3x M2.5mm countersunk machine screws

  • 4x M3x4mm countersunk machine screws (black)

What is NOT included

You will need to bring

  • Raspberry Pi 4 Model B (Bring Your Own Pi)

    • 2GB RAM and above is recommended

  • SD card

  • Power Adapter

  • USB Cable

Non-Features

To avoid ‘discovery disappointment’ please exercise ‘expectation management’ by paying special attention to the limitations highlighted below:

  • No internal battery

  • No PoE

Bring Your Own Pi Kit

Please note this is a kit that includes everything you need to assemble your own WLAN Pi R4 excluding the Raspberry Pi 4 and SD card.

WLAN Pi R4 Assembly Guide

What is included

  • Panda Wireless PAU0F AXE3000 Wi-Fi 6E USB Adapter

    • Up angle / 90 degree USB adapter

  • Waveshare LCD display & buttons HAT (pre-threaded with Joystick cap attachment)

  • Waveshare Lightweight Aluminium Alloy Case

  • 3D printed PETG

    • Fascia

    • Internal Support

    • Vanity Plate

    • (Waveshare UI board) Shim

  • 3D Printed Rubberised

    • Button pads

  • Joystick cap v2

  • 1x Brass threaded insert (spare Joystick cap attachment)

  • 3x M2.5mm countersunk machine screws

  • 4x M3x4mm countersunk machine screws (black)

What is NOT included

You will need to bring

  • Raspberry Pi 4 Model B (Bring Your Own Pi)

    • 2GB RAM and above is recommended

  • SD card

  • Power Adapter

  • USB Cable

Non-Features

To avoid ‘discovery disappointment’ please exercise ‘expectation management’ by paying special attention to the limitations highlighted below:

  • No internal battery

  • No PoE

WLAN Pi R4

The WLAN Pi R4 is literally built upon the Raspberry Pi 4, sandwiched within a ‘Waveshare Lightweight Aluminium Alloy Case’ / heatsink and finished off with a 3D-printed PETG fascia.

WLAN Pi

Built by Wi-Fi professionals for Wi-Fi professionals!

This new generation of WLAN Pi is built upon the Raspberry Pi platform and runs WLAN Pi OS (a custom ‘Wi-Fi-focused’ fork of Raspberry Pi OS).

The WLAN Pi can perform a variety of wireless networking tasks:

  • Operate as an iPerf2, iPerf3 throughput testing endpoint

  • LibreSpeed test server, browser based http speed test utility

  • WLAN Pi Profiler, used to discover the true capabilities of Wi-Fi clients

  • Remote Sensor

    • for scanning with Wi-Fi Explorer Pro

    • for packet capture using Airtool

  • Wi-Fi Analysis

    • Kismet

    • TCPDUMP

    • Aircrack-ng

  • WLAN Pi Chat-Bot

  • CDP/LLDP neighbour detection

  • Internet service reachability

For a comprehensive (and up to date) list of features check out the WLAN Pi User Guide.

Assembly Guide

WLAN Pi R4 Assembly Guide